A washing machine spikes hard on the spin cycle. In a off-grid cabin in Australia it uses about 500 Wh a day. Wattonomy sizes the battery (10.24 kWh), the solar (415 W) and every cable around it to AS/NZS 3008, then hands you the wiring diagram and a shoppable parts list.
Wire & fuse sizes follow AS/NZS 3008 — each conductor carries its fuse and stays under a 3% voltage drop.
A washing machine’s daily energy is modest, but the spin motor can spike about 2,200 W. The inverter and cable must carry that surge without faulting. Wattonomy sizes the bank, solar and every cable around it, to AS/NZS 3008.
Real numbers from a sized off-grid cabin build for Australia, not rules of thumb.
About 500 Wh a day for the washing machine itself, the figure everything else is sized from.
About 10.24 kWh of LiFePO4 (roughly 213 Ah at 48V) to carry it through the night and a cloudy day.
About 415 W of panel replaces a day’s use in fair sun; poor light or winter wants more, or a second charging source.
Sized to start the 2200 W surge cleanly: MultiPlus-II 48/5000, with cable to match, to AS/NZS 3008.
Free gets you a safe, correctly-sized design. The build binder gets you the documents to build it right — and prove it's right.
The build binder is a one-time unlock — no subscription, no auto-renew.
A washing machine runs at about 500 W and can surge to roughly 2200 W on start-up, using around 500 Wh over a day. The inverter has to cover that surge, not just the running watts.
For this build Wattonomy sizes about 10.24 kWh (roughly 213 Ah at 48V) of LiFePO4 — enough to carry the washing machine plus your basics through the night and a cloudy day. Your exact number depends on how many days of backup you want.
About 415 W of panel replaces a day’s use in fair sun; poor light, winter or shade wants more, or a second charging source such as a DC-DC charger off the engine. The tool sizes it from your climate.
Yes. Every cable, fuse and busbar is sized to AS/NZS 3008 using mm², at the 12/24V DC and 230V AC typical of Australia systems. Nothing here is a rule of thumb.
Plain version: these are the recognized rulebooks your design is sized against, so the numbers hold up to a surveyor, an inspector or an insurer.
Wattonomy applies these standards in its calculations. It is not certified, sponsored or endorsed by ABYC, ISO, NFPA or Victron — it sizes your design to meet what they require, and shows the working.
It takes about a minute. No account, no email.